位置: 网站首页 > 新闻中心
  • 自动缠绕机的日常维护流程
  • 本站编辑:杭州巨龙包装有限公司发布日期:2018-05-15 15:37 浏览次数:

  自动缠绕机生产效率和质量是赚取更多利润的关键,上对于一台高性能的设备而言,如果不注重日常的维护和保养,再好的设备也会出现这样或者那样的维修故障,给以后的生产造成一定的影响。麦格小编缠绕包装机设备的日常维护保养做了详细的说明。

新型K100预拉伸缠绕包装机  新型K100预拉伸缠绕包装机

201612211119072232-lp.jpg

 

  对于缠绕包装机的日常维护,一般来说可以分为三个步骤:各部件的润滑,部件的定期清洁以及日常的基本维护,日常维护的好坏直接影响到自动缠绕机的使用寿命,因此对于缠绕机设备的维护要一步一步仔细和认真,以下是自动缠绕机的基本维护和保养的相关知识。

  首先对于任何一个设备而言,润滑是各个部件正常工作的关键,在对自动缠绕机的做润滑的同时一定要注意:

  (1).定时给缠绕包装机各齿轮啮合处、带座轴承注油孔及各运动部件加注机油润滑,每班一次,要做到日复一日,坚持才有效果,本着对设备的负责,对以后工作得以顺利进行提供技术支持。

  (2).对于自动托盘缠绕机来说加注润滑油时,请注意不要将油滴在传动皮带上,以防造成打滑丢转或皮带过早老化损坏。

  (3).自动缠绕机的减速机是该设备中重要的组成部分,减速机严禁无油运转,首次运转300小时后,清洗内部换上新油,其后每工作2500小时换油,这一现象是不变的,必须要认真执行。

  对于各部件的润滑工作很重要,另外对于润滑油的质量好坏也需要我们注意,例如在-5℃~10℃环境下使用工业齿轮油ISOVG150,在10℃~40℃的时候使用工业齿轮油N320可以达到理想中的包装润滑效果。

  润滑油质量的好坏和日常的润滑工作虽然能够保证设备各部件正常运行,但是我们不能够只注重润滑而忽视设备的清洁工作,尤其对于食品行业而言,清洗是非常重要的,有效的清洁不仅能够延长缠绕机设备使用寿命而且可以保证食品质量的安全卫生。

The production efficiency and quality of the automatic winding machine is the key to making more profits. For a high performance equipment, if we do not pay attention to the daily maintenance and maintenance, the good equipment will also have such or such maintenance failures, which will have a certain impact on the future production. The daily maintenance of MCG winding machine is explained in detail.

New K100 pre stretch wrapping machine K100 new pre winding wrapping machine

The product display of the MEG film winding machine

In general, the daily maintenance of wrapping machine can be divided into three steps: the lubrication of each component, the regular cleaning of the components and the daily basic maintenance. The daily maintenance will directly affect the service life of the automatic winding machine. Therefore, the maintenance of the winding machine should be carefully and conscientiously maintained. The following are the following Basic knowledge of maintenance and maintenance of automatic winding machine.

First of all, for any equipment, lubrication is the key to the normal operation of the components.

(1). Regularly give the gear meshing of the winding packer, the oil injection hole of the bearing and the lubricating oil of each moving part, each time, we should do the day after day, keep the effect, and provide technical support for the future work.

(2) when the oil is added to the automatic tray winding machine, be careful not to drop the oil on the transmission belt to prevent the slipping or the premature aging of the belt.

(3). The reducer of the automatic winding machine is an important part of the equipment. The reducer is strictly forbidden to run without oil. After the first operation for 300 hours, the new oil is replaced by the new oil in the cleaning, and then the oil is changed for 2500 hours every work. This phenomenon is invariable and must be carried out seriously.

The lubrication of each component is very important, and the quality of the lubricating oil also needs to be paid attention to. For example, the use of industrial gear oil ISOVG150 at - 5 C ~10 C and the use of industrial gear oil N320 at 10 C ~40 C can achieve the ideal packaging lubrication effect.

The quality of the lubricating oil and the daily lubrication can guarantee the normal operation of the equipment, but we can not only pay attention to the lubrication but ignore the cleaning of the equipment. Especially for the food industry, cleaning is very important. The effective cleaning can not only prolong the service life of the winding machine, but also can be used in the food industry. To ensure the safety and hygiene of food quality.


友情链接:幸运蛋蛋开奖走势图  东方彩票  幸运彩票官网  天天彩票网  天天彩票网  幸运蛋蛋开奖直播  幸运彩票平台  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!